![]() Uninstall VCOM, Preloader, and MTK drivers and re-install them. You might have the wrong drivers installed.First, delete the SP Flash tool folder and re-extract it.Meaning: Either you have selected the wrong flashing settings or the firmware that you are flashing is not compatible with your handset. If it doesn't work, then open the scatter file using Notepad ++ and replace _NODL_FAT with _NODL, i.e., remove _FAT.Retry flashing with another scatter file, provided MTK backup has more than one scatter file.Don't format bootloaders, simply format the device in the tool itself.Meaning: The flash tool has trouble writing to certain partitions due to some incompatibility. This error code is also read as Android download pmt is ready, and layout has been changed or PMT changed for the rom or simply SP flash tool error 8038. ![]() You may backup the firmware of the MTK device before flashing to have a copy of the original PRELOADER as it is very hardware-specific and a big problem for cloned devices with MTK SoCs out there.Solution: Simple, load the correct scatter file Error 8038: PMT changed for the ROM it must be downloaded ![]() You may be able to flash the hard software bricked MTK device again only after making a full firmware backup from another working MTK device (the same model). The operating system for the MTK device is in the other firmware components anyways.įlashing the wrong PRELOADER could be very problematic afterwards. The PRELOADER firmware component only contains the drivers used by the MTK device to negociate the connection with a PC and transmit back confirmation data, at the other end of the USB data cable. You are now protected from a hard software brick. Warning! To conserve the communication interface that the MTK device is using to accept data from the computer trough the “ MediaTek PreLoader” driver please uncheck the “ PRELOADER” component during firmware flashing. ![]() There are two main versions of SP Flash Tool and each has a number of sub-versions as listed below: Download SP Flash Tool V3 for Windows:ĭownload SP Flash Tool V3.1344 ⇠ latest version Download SP Flash Tool V5 for Windows:ĭownload SP Flash Tool V5.2036 ⇠ latest versionĭownload SP Flash Tool v5 – Archived versions ![]() The software will allow the download of ROMs and other functionalities to MTK – MediaTek enabled devices. Below you can download archived and latest versions of the software. Smart Phone Flash Tool software & drivers are provided by MediaTek Inc. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |